C502 Measurement details

Composite elementInteractive

Identification of measurement type.

Elements

PositionElementNameTypeMin/MaxRepeat
C502-106313Measured attribute codeOptID1/31
C502-206321Measurement significance codeOptID1/31
C502-306155Non-discrete measurement name codeOptID1/171
C502-406154Non-discrete measurement nameOptAlphanumeric1/701

Element Details

ID6313NameMeasured attribute codeLength1/3Codes
  • <>ACV
    The length in a vehicle, whereby the complete width and height over that length is needed for the goods.
  • <>L
    The measured legal weight.
  • <>TH
    The measured thickness.
  • <>AEP
    Weight which is the outcome of the division of the total gross weight by the number of units.
  • <>BNP
    The observed distance from the tank bottom or datum plate to the established reference point.
  • <>ADY
    Maximum capacity of a transport container.
  • <>ZV
    The measured chemical element vanadium.
  • <>AFK
    Weight which has been certified.
  • <>AAT
    Self-explanatory.
  • <>AAD
    [6292] weight (mass) of goods including packing but excluding the carrier's equipment.
  • <>EA
    The measured elongation.
  • <>HT
    Numeric value of height.
  • <>BNK
    The total volume of all petroleum liquids, sediment and water corrected by the appropriate volume correction factor for the observed temperature and american petroleum institute (api) gravity, relative density, or density to a standard temperature.
  • <>DS
    The measured distance between points.
  • <>AAO
    Self-explanatory.
  • <>ABD
    Straightness of the item.
  • <>G
    [6292] weight (mass) of goods including packing but excluding the carrier's equipment.
  • <>ZTI
    The measured chemical element titanium.
  • <>TC
    A measurement in relation to temperature.
  • <>ADR
    The starting position from the beginning of an item located in the length direction.
  • <>AEK
    Measurement of the strontium component.
  • <>FL
    The measured longitudinal flatness.
  • <>AEF
    The grain size.
  • <>ZP
    The measured chemical element phosphorus.
  • <>DN
    The measured density.
  • <>BNF
    The total volume of all petroleum liquids and sediment and water, excluding free water, at observed temperature and pressure.
  • <>AAR
    Self-explanatory.
  • <>SQ
    The measured shipped quantity.
  • <>AAB
    [6292] weight (mass) of goods including packing but excluding the carrier's equipment.
  • <>ABI
    Measure of the malt and hops content of beer, before fermentation has taken place.
  • <>ACP
    Estimated size or measure of anything in three dimensions.
  • <>ABY
    Registered summer dead weight total tonnage of the vessel.
  • <>ZZZ
    A code assigned within a code list to be used on an interim basis and as defined among trading partners until a precise code can be assigned to the code list.
  • <>TN
    Measurement of a specific length of time.
  • <>WU
    The weight per unit of length.
  • <>AEV
    Acid measurement of juice.
  • <>PTN
    A measurement per tonne.
  • <>MO
    Measurement application is the moisture content of the item.
  • <>CV
    Item weight considering its maximum possible humidity.
  • <>BNQ
    The measured distance from the tank bottom or datum plate to the established reference point.
  • <>ADX
    Actual filling weight of a transport container.
  • <>AEA
    Maximum height of products or packages loaded onto a given transportation device or equipment such as a pallet.
  • <>ZW
    The measured chemical element tungsten.
  • <>AFJ
    The non-water content.
  • <>DI
    Diameter of an article.
  • <>BNA
    The leaning or inclination of a vessel expressed in degrees port or starboard.
  • <>AAU
    Temperature identified system or process works according to specifications.
  • <>ZSL
    The measured substance silicium oxyd.
  • <>ACG
    The weight on which charges are based.
  • <>AAE
    Gross weight at line item level.
  • <>BMZ
    The measurement of the silver component.
  • <>ACW
    Number of axles of movable equipment or means of transport on wheels.
  • <>ZCL
    The measured chemical element chlorine.
  • <>M
    The measured minimum weight.
  • <>AEQ
    Depth of water from the surface of water to the bottom of the vessel measured at the draft mark of the bow.
  • <>ZNI
    The measured chemical element nickel.
  • <>TT
    The measured time.
  • <>ZCA
    The measured chemical element calcium.
  • <>ABS
    Weight at line item level.
  • <>ZGE
    The measured chemical element germanium.
  • <>FV
    The measured transverse flatness.
  • <>XH
    The height of the removable sides of a flat bed truck.
  • <>ADU
    The end position from the beginning of an item located in the width direction.
  • <>AFG
    The percentage of fat content in dry matter.
  • <>ZMO
    The measured chemical element molybdenum.
  • <>BNL
    The total volume of all petroleum liquids, sediment and water and free water at observed temperature and pressure.
  • <>RMW
    Measurement indication for paper.
  • <>BR
    The measured brightness.
  • <>AAX
    The observed volume after adjustment for factors such as temperature or gravity.
  • <>ZAS
    The measured chemical element arsenic.
  • <>AAH
    Force exerted by a thruster installed at the bow of a vessel.
  • <>ABC
    The measured radius.
  • <>ABH
    The area occupied by an item when unrolled.
  • <>ABX
    Tonnage of conveyance.
  • <>ZTE
    The measured chemical element tellurium.
  • <>WT
    [6150] numeric value of weight.
  • <>AEW
    Measurement of force required to drive a standard penetrating stamp.
  • <>AEG
    The chemical element lanthanides.
  • <>WD
    Numeric value of width.
  • <>BNG
    The total volume of all petroleum liquids, sediment, and water excluding free water, corrected by the appropriate volume correction factor for the observed temperature and american petroleum institute relative density, or density to a standard temperature.
  • <>AAS
    Self-explanatory.
  • <>RY
    The measured ratio.
  • <>ACA
    Total weight of non-containerized cargo on vessel.
  • <>AAC
    Total weight of goods excluding packaging.
  • <>BL
    The measured breaking load.
  • <>AAF
    [6048] weight (mass) of the goods themselves without any packing.
  • <>BMY
    The measurement of the platinum component.
  • <>N
    The actual weight of the goods excluding packaging.
  • <>ZCO
    The measured chemical element cobalt.
  • <>BSW
    The measured breaking strength when wet.
  • <>AER
    Depth of water from the surface of water to the bottom of the vessel measured at the draft mark of the stern.
  • <>ZZN
    The measured chemical element zinc.
  • <>BNR
    The measured distance from the cargo liquid surface to the reference point.
  • <>AEB
    Maximum height up to which the same product or package may be placed one upon the other for storage purposes.
  • <>WA
    The weight per unit of an area.
  • <>AFI
    The hydrate content which occurs in an alcoholic product after bottling.
  • <>BNB
    The condition of a vessel with reference to its longitudinal axis.
  • <>HF
    The measured hardness.
  • <>AAV
    Temperature identified system or process does not work according to specifications.
  • <>VH
    The height of the door of a van or container.
  • <>AEM
    Maximum storage limit of the equipment.
  • <>AFF
    The total cubic space occupied by an item, taking into account any protruding components, arrived at by multiplying the maximum length, width and height.
  • <>ZMN
    The measured chemical element manganese.
  • <>BNM
    The measured distance from the surface of the liquid to a fixed datum plate or to the tank bottom.
  • <>BS
    The measured breaking strength.
  • <>AAY
    Water content in product.
  • <>AAI
    The hydrate content of an alcoholic product at the moment of bottling.
  • <>VW
    The width of the door of a van or container.
  • <>ABB
    The measured gauge length.
  • <>RUN
    The measured run (process).
  • <>A
    The measured consolidated weight.
  • <>PRS
    Measurement identifying the amount an item has been stretched prior to use.
  • <>BRA
    The measured brakes.
  • <>ZK
    The measured chemical element potassium.
  • <>LM
    The measured maximum length.
  • <>CZ
    To specify length of core on which product is to be placed.
  • <>ADT
    The start position from the beginning of an item located in the width direction.
  • <>ZBI
    The measured chemical element bismuth.
  • <>AEH
    The value of the elasticity.
  • <>RF
    The measured resistivity.
  • <>AFC
    Measure of the elastic force of the pulp of a fruit. it is measured with a penetrating stamp with diameter 25.
  • <>BNH
    The change in the volume measurement.
  • <>ZSE
    The measured chemical element selenium.
  • <>DP
    The measured depth.
  • <>ACN
    Estimated weight (mass) of goods, including packing and excluding carrier's.
  • <>AAL
    [6160] weight (mass) of goods including any packing normally going with them to a buyer in a retail sale.
  • <>ZWA
    The measured waste content.
  • <>ABG
    The length of an item when unrolled.
  • <>ZCE
    The measured chemical element cerium.
  • <>D
    The agreed weight of despatched goods whose weight may change during transport.
  • <>T
    Weight excluding goods and loose accessories.
  • <>ZCU
    The measured chemical element copper.
  • <>AEX
    Measurement of the elastic force using a standard penetrating stamp.
  • <>ZN
    The measured chemical element nitrogen.
  • <>ZFS
    The measured substance iron plus silicon.
  • <>CT
    In combination with the other data elements of the actual segment this code indicates the measured content of a package.
  • <>ADZ
    The declared net weight of a product or products used for invoicing, customs or transport purposes.
  • <>BNS
    The correction applied to the observed gauge or observed volume when a vessel is not on an even keel.
  • <>FI
    Used e.g. in textile, print industries.
  • <>AEC
    The calculated weight of the item based on the ordered dimensions.
  • <>AFH
    Measurement of the sugar content of a solution.
  • <>BNC
    The volume of water present in a container that is not in suspension in the contained liquid.
  • <>AAW
    The observed volume unadjusted for factors such as temperature or gravity.
  • <>ZSN
    The measured chemical element tin.
  • <>AF
    The measured angle of bend.
  • <>ACE
    [4240] endorsement of the true weight (mass) as ascertained or verified by the railway (cim 81).
  • <>AAG
    Force exerted by a thruster installed at the stern of a vessel.
  • <>ZAL
    The measured chemical element aluminium.
  • <>ZTA
    The measured chemical element tantalium.
  • <>ABA
    The measured fibrosity.
  • <>ACX
    The revenue-producing load carried by a means of transport.
  • <>B
    The measured billed weight.
  • <>ZZR
    The measured chemical element zirconium.
  • <>XZ
    The measured spool size.
  • <>ZH
    The measured chemical element hydrogen.
  • <>LN
    (6168) length of pieces or packages stated for transport purposes.
  • <>ADW
    The end position from the beginning of an item located in the thickness direction.
  • <>AEN
    The index of transport determines the maximum radiation level at a distance of 1m from the external surface.
  • <>WM
    The maximum distance from side to side.
  • <>AFE
    The maximum weight which may be stacked upon a product or package without the product or packaging being crushed.
  • <>BNN
    The total weight of all petroleum liquids excluding sediments, water and free water.
  • <>MW
    The measured maximum weight.
  • <>AAZ
    The measured tensile stress.
  • <>RP
    The measured reduction of area.
  • <>YS
    The measured yield stress.
  • <>AAJ
    The number of units contained on a pallet.
  • <>CHN
    The measured change.
  • <>AAM
    [6300] the measure of the overall size of a ship determined in accordance with the provisions of the international convention on tonnage measurement of ships, 1969.
  • <>ABF
    The width of an item when unrolled.
  • <>BRE
    The measured break.
  • <>E
    The measured estimated new weight.
  • <>U
    [6150] numeric value of weight.
  • <>AEY
    Measurement of weight of juice, based on 100 grams of the entire weight.
  • <>ID
    The measured inside diameter.
  • <>ZNA
    The measured chemical element sodium.
  • <>ZO
    The measured chemical element oxygen.
  • <>AEI
    The weight of a product when all liquids used in the packaging of the product have been removed.
  • <>AFB
    Measure of the elastic force of the pulp of a fruit. it is measured with a penetrating stamp with diameter 10.
  • <>BNI
    The total volume of all petroleum liquids, excluding sediment and water and free water, corrected by the appropriate volume correction factor for the observed temperature and american petroleum institute gravity relative to density or to a standard temperature.
  • <>BW
    The measured basis weight.
  • <>HM
    The measured maximum height.
  • <>AAP
    Self-explanatory.
  • <>ZSI
    The measured chemical element silicon.
  • <>GG
    The measured gauge.
  • <>GW
    The measured maximum gross weight.
  • <>ZPB
    The measured chemical element lead.
  • <>ZB
    The measured chemical element boron.
  • <>AET
    Weight of a transport equipment including the cargo and carrier's equipment.
  • <>BNT
    The distance between the bow and the bridge of a vessel.
  • <>FN
    The measured flatness.
  • <>AED
    The chemical composition ferrite.
  • <>RJ
    Hardness in the rockwell c scale.
  • <>DL
    The measured delta value l.
  • <>ZMG
    The measured chemical element magnesium.
  • <>BND
    The measured bands.
  • <>OD
    The measured outside diameter.
  • <>ADV
    The start position from the beginning of an item located in the thickness direction.
  • <>AEO
    Activity of radioactive material.
  • <>RA
    The measured relative humidity.
  • <>AFD
    Measure of the elastic force of the pulp of a fruit. it is measured with a penetrating stamp with diameter 50.
  • <>BNO
    The measurement of non-hydrocarbon solid material and water in suspension in petroleum liquid.
  • <>ZSB
    The measured chemical element antimony.
  • <>DW
    The measured width of a boxcar door.
  • <>AAK
    An indication of the fat content of a product.
  • <>ZCB
    The measured chemical element columbium.
  • <>ZCR
    The measured chemical element chromium.
  • <>IB
    The measured impact energy.
  • <>AEZ
    Measurement of the colouring of the epidermis of a fruit.
  • <>ZNB
    Self-explanatory.
  • <>ADS
    The end position from the beginning of an item located in the length direction.
  • <>AEJ
    Measurement of the gallium component.
  • <>AFA
    The measurement of the fixed increment.
  • <>BNJ
    The material in vessel tanks, void spaces, and pipelines after discharge.
  • <>LND
    The measured lost end.
  • <>DR
    The measured fineness of a material.
  • <>AAN
    [6302] the measure of the useful capacity of a ship determined in accordance with the provisions of the international convention on tonnage measurement of ships, 1969.
  • <>ABE
    The measured strain.
  • <>F
    The measured deficit weight.
  • <>CM
    The measured colour.
  • <>ABZ
    Total weight of containerized cargo on vessel.
  • <>XQ
    The measured squareness.
  • <>AEU
    Total weight of all transport equipment including the cargo and carrier's equipment.
  • <>ZC
    The measured chemical element carbon.
  • <>AEE
    The impurity of the product i.e. the measurement of other chemical elements not normally appearing in a product.
  • <>ZS
    The measured chemical element sulphur.
  • <>BNE
    The relative density of petroleum liquids as specified by a standard developed by the api.
  • <>AAQ
    Value of energy consumption.
  • <>AAA
    [6160] weight (mass) of goods including any packing normally going with them to a buyer in a retail sale.
  • <>ABJ
    The amount of air space taken up by the entity identified in the 6311 qualifier.
  • <>ACS
    Total overall length of the vessel.
  • <>ZFE
    The measured chemical element iron.